Makita DLX2268TJ 2 Piece 18 Volt LXT Kit; Includes Impact Wrench (DTW285Z); Rotary Hammer Drill (DHR242Z); Complete With 2 x 5.0Ah Li-Ion Batteries; Charger And Makpac Case; Brushless

Efficient Brushless DC motor provides higher productivity.

Makita’s first Cordless Combination Hammers with Dust extraction system.
 

DHR242 User benefits:
One touch slide chuck for SDS-plus bit.
Easy-to-grip handle ergonomically designed to: Give maximum power thrust.
Provide a sure and comfortable grip in any operation; overhead application, drilling with palm-up or palm-down grip.
3 mode operation: Rotation + Hammering, Hammer only, Rotation only.
The tool body is separated into the upper and lower housings at the foot of handle portion where the houses are jointed with vibration absorbing cushion rubbers.
Brushless DC motor to reduce energy loss by 30%.
Unique rubber joint construction suppresses the transmission of vibration to battery terminals, minimizing battery failures such as terminal breakage or poor electrical contact.
3 year manufacturer’s warranty (online registration required)

DHR242 Technical:
Battery Type Lithium-ion.
Voltage 18 volt.
Capacity in Concrete 24 mm.
Capacity in Steel 13 mm.
Capacity in Wood 27 mm.
Impact energy 2.0 J.
Blows per minute 0 - 4700 bpm.
No Load Speed (Hi) 0 - 950 rpm.
Vibration: Drilling 3.5 m/sec².
Vibration K factor 1.5 m/sec².
Vibration: Hammer Drilling 13.5 m/sec².
Vibration: Chiselling 10.5 m/sec².
Net weight 3.1 - 3.8 kg.

DTW285 User benefits:
Electric brake
Variable speed control by trigger
Forward / reverse rotation
LED job light
Brushless motor
Compact design with overall length of 147mm
Phosphorescent bumper
Ergonomic soft grip

Equipped with Battery protection circuit:
Designed to protect the battery from damages due to over discharge, high temperature or overload current.

Battery fuel gauge

Reverse rotation auto stop mode:
This mode works only with pulling the trigger fully in counter-clockwise rotation.
When the bolt/nut gets loosened enough, the tool stops the impact and rotation in 0.2 seconds.

DTW285 Technical info:
Nut Busting Torque 400 Nm
Battery Type Lithium-ion
Body only machine
Voltage 18 Volt
Driving Shank 1/2" Square
Blows per Minute (Hi) – ipm 0 - 3500 ipm
Blows per Minute (Med) – ipm 0 - 2600 ipm
Blows per Minute (Lo) – ipm 0 - 1800 ipm
Standard Bolt M10-M20
High Tensile Bolt M10-M16
Noise sound pressure 96 dB(A)
Noise sound power 107 dB(A)
Noise K factor 3 dB(A)
No Load Speed (hard/med/soft) 0-2800 / 2100 / 1600 rpm
Max Fastening Torque 280 Nm
Vibration: Fastening Bolt 11.5 m/sec²
Vibration K factor 1.5 m/sec²
Net weight 1.5 - 1.8 kg